2024-12-12
Maintenance methods for concrete mixing plants
1. Check the working condition of the lubrication points in each rotating part and replenish the lubricant in a timely manner. 2. Check the lubricant level in the mixer’s lubricant cup. 3. Check the oil level of the oil mist lubricator once a week and refill as necessary. 4. Open the water valve once a day to drain the condensed water from the air compressor and the air tank. 5. Some bolts and nuts should be checked regularly for looseness and tightened in a timely manner. 6. Ensure that the water, air, and additive systems and all equipment are functioning normally.
View Details2021-12-09
Complete Guide to Troubleshooting Concrete Mixing Plant
Fault phenomenon: The spiral feeder is feeding very slowly, with feeding time exceeding 2 minutes, while normal feeding is below 20 seconds. Cause analysis: The main influencing factors are the poor discharge from the powder silo and damage to the spiral conveyor, etc. The manifestations of poor discharge from the powder silo include arching of the powder, material blockage at the discharge port of the powder silo, too small opening of the discharge butterfly valve, and insufficient material in the powder silo. The damage to the spiral conveyor is mainly due to deformation of the spiral blades, which cannot transport normally.
View Details2024-12-19
Autumn Concrete Mixing Station Maintenance Guide
As autumn arrives, the temperature difference between day and night increases, and windy and sandy weather becomes more frequent, especially in the north. For concrete mixing stations, it is essential to carry out maintenance work in autumn! Proper maintenance in autumn can extend the lifespan of the mixing station's machinery and is also an effective way to improve work efficiency. Below are several key aspects summarized for the autumn maintenance of mixing stations:
View Details